了解更多關于水性漆...
How to use water-based industrial paint
Water-based industrial paint construction process: Plate shot blasting pretreatment → surface cleaning → pre-coating primer → drying → surface treatment → touch-up primer → coating transition primer → drying → water-based topcoat → drying → marking → handover . Acceptance method of water-based industrial paint 1. Thorough rust removal without filling or spraying. 2. The thickness of the greasy layer is not more than 3mm (refers to the area greater than 0.01 square meters). 3. The greasy layer has no cracking, blistering and falling off. 4. The corners are flat, smooth, and the transition is smooth. 5. The thickness of the paint layer is consistent, and there is no delamination and cracking. 6. Rubber parts, electrical circuits, decorative parts, glass and other non-painted parts are not stained with oil or oil mist. 7. No error spraying variegated colors. 8. Before applying primer, the chassis should be cleaned. 9. The gloss and texture of the same batch of products are consistent, and the color is consistent with the drawing requirements and the color palette confirmed by the company.
水性工業漆怎么使用
水性工業漆施工工藝 板材拋丸預處理→表面清理→預涂底漆→干燥→表面處理→補涂底漆→涂裝過渡底漆→干燥→涂水性面漆→干燥→涂打標記→交驗。水性工業漆驗收方法 1、除銹徹底而無填膩或施噴。2、膩層厚度不大于3mm(指在面積大于0.01平方米范圍內)。3、膩層無開裂、起泡、脫落現象。4、各邊角平整、光滑、過渡園順。5、漆層厚度一致,無脫層、開裂。6、橡膠件、電器線路、裝飾件、玻璃及其他非油漆部位不沾油或油霧等。7、無錯噴雜色。8、施噴底漆前,底盤處理清潔。9、同一批次產品的光澤、紋理一致,顏色與圖紙要求及公司確認的色板一致。www.sisdin88.com